A regulatory deadline that applies to every business shipping products classified as dangerous goods is now here. From 24 June 2026, Commission Delegated Directive (EU) 2025/1801 becomes fully enforceable across all EU Member States, introducing a mandatory harmonised checklist for roadside inspections, a new three-tier infringement classification system, and expanded liability for every party in the supply chain. Vehicles stopped in non-compliance face immediate immobilisation. For e-commerce brands shipping batteries, aerosols, perfumes, cleaning products, or any other ADR-classified goods — this is not a future concern. It is in force today.
📋 In this article
The ADR — the European Agreement Concerning the International Carriage of Dangerous Goods by Road — is the backbone of how hazardous materials are transported across Europe. It sets out classification requirements, packaging standards, documentation rules, and driver certification obligations. The ADR is updated every two years by UNECE, and EU law must stay in step with those updates.
Directive (EU) 2022/1999 established the base framework for how EU enforcement authorities check compliance with the ADR. Delegated Directive (EU) 2025/1801, adopted by the European Commission on 23 June 2025 and published in the Official Journal on 13 October 2025, updates the annexes to that framework — specifically the inspection checklist (Annex I) and the infringement risk classification table (Annex II). Member States were required to transpose it into national law by 23 June 2026. The rules apply from 24 June 2026.
This matters for e-commerce brands because dangerous goods classification is far broader than most operators realise. Lithium batteries, aerosol sprays, alcohol-based hand sanitisers, nail polish, perfume, paint, and certain cleaning agents all fall within ADR scope depending on quantity and concentration. If your business ships any of these, your carriers and logistics partners are subject to these checks — and liability can now extend to you as the consignor.
Under the Category I infringement rules, the absence of mandatory ADR documentation — including the transport document or driver ADR certificate — constitutes a high-risk infringement that shall normally lead to immediate corrective measures, including immobilisation of the vehicle. Inspectors retain discretion over the precise response, but at a Category I level, stopping the vehicle is the default. If your outbound documentation is not complete and accurate before the vehicle departs, you risk delayed shipments, fines, and reputational damage across the supply chain.
The most significant operational change in Directive 2025/1801 is the introduction of a single, harmonised inspection checklist that every national enforcement authority in the EU must use during roadside checks. Before this directive, each Member State used its own checklist format, which created inconsistencies and made cross-border compliance difficult to manage reliably.
The new checklist covers the following inspection points, each of which is tied to a specific ADR reference:
| Inspection area | What is checked | Potential infringement category |
|---|---|---|
| Transport documentation | Dangerous goods transport document, written instructions, approval certificates | I (if absent) |
| Driver certification | Valid ADR training certificate for the goods class carried | I (if absent or invalid) |
| Vehicle markings and placarding | Orange plates, hazard labels, correct size and positioning | II (if incorrect or missing) |
| Safety equipment | Fire extinguishers (operational), personal protective equipment | II (if non-functional) |
| Vehicle and container integrity | Structural serviceability, absence of leaks, closure of tanks/packages | I (if leak present or imminent danger) |
| Packaging compliance | UN-approved packaging in date, undamaged, correctly labelled | II (if damaged or overdue) |
| Approval certificates | Vehicle, tank, and container approval documents present and valid | I or II depending on severity |
| Goods classification accuracy | UN numbers, proper shipping names, packing groups match transport document | I or II depending on risk level |
Because every enforcement body now uses the same checklist, operators shipping across multiple EU countries will encounter consistent inspection criteria at every border crossing. The intent is to reduce the interpretative differences that previously allowed the same non-compliance to be treated differently in different Member States.
Lithium batteries (Class 9, UN 3480 / UN 3481), aerosol products (Class 2), alcohol-based products including certain perfumes and hand sanitisers (Class 3, depending on alcohol concentration and flashpoint), and certain adhesives are all subject to ADR requirements. If you sell these products and use a third-party carrier for road transport within the EU, your carrier's documentation must comply with the new checklist. Classification depends on concentration, quantity, and flashpoint — always verify against the ADR tables or with a qualified Dangerous Goods Safety Adviser before shipping.
One of the most practically impactful changes in Directive 2025/1801 is the formal revision of the three-tier risk classification for ADR infringements. The risk category framework existed in the parent Directive 2022/1999, but the updated Annex II in Directive 2025/1801 aligns the classification list with the current ADR 2025 standard and expands the catalogue of classified offences. Ireland's transposition instrument, S.I. No. 249/2026, illustrates this: it adds 10 new classified offence types (numbers 57–66), covering scenarios such as goods transported without vehicle identification and carriage by a prohibited mode.
These are infringements that carry a high risk of death, serious personal injury, or significant environmental damage. When identified during a roadside check, the vehicle must be immobilised immediately. Category I breaches include: leakage of dangerous substances, carriage without mandatory documentation, invalid driver ADR certificate, carriage in a prohibited or unapproved containment vessel, failure to identify dangerous goods on the vehicle, and carriage in bulk in a structurally unsuitable container.
Category II covers violations that create a risk of injury or environmental harm. The directive requires rectification on the spot where feasible; otherwise, corrections must be completed no later than the end of the current transport operation. The journey may continue if on-the-spot correction is not possible. Examples include: non-functioning fire extinguishers, incorrect or non-compliant vehicle markings, damaged packaging, failure to comply with ADR provisions on staff training, and operation of a transport unit with more than one trailer or semi-trailer.
Category III captures formal or minor deficiencies with limited safety impact that can be addressed after the inspection without stopping the journey. Incorrect sizing of placards or labels — where the content is otherwise present and accurate — typically falls here. While these do not trigger immediate enforcement, they are recorded and can inform subsequent checks or operator risk profiles.
Each EU Member State used its own inspection checklist. The same documentation gap could lead to an on-the-spot warning in one country and vehicle immobilisation in another. Responsibility for non-compliance often defaulted to the driver alone, even when the fault lay with the shipper or packer.
A single harmonised checklist applies across all EU Member States. Risk categories are standardised and linked to specific ADR provisions. Consignors, loaders, packers, fillers, and carriers all have clearly defined, enforceable responsibilities — the driver is no longer the only accountable party at the roadside.
ShippyPro's AI Shipping Automation uses a trigger/condition/action workflow model. You can configure rules based on product attributes, weight, or order tags that apply actions to flag or hold dangerous goods shipments before a label is generated — adding a layer of process control on top of your carrier handover.
One of the most consequential structural changes in Directive 2025/1801 is the explicit codification of responsibility across the entire logistics chain. The directive names the following roles and assigns each party specific compliance duties:
For e-commerce businesses, the key implication is that consignor liability is now clearly defined in EU law. If you prepare an incorrect transport document, use non-compliant packaging, or fail to apply the correct dangerous goods classification to your product, you can face administrative or criminal penalties — even if you never touch the vehicle.
If you fulfil orders through a 3PL warehouse or a marketplace fulfilment network, the question of who acts as the consignor becomes important. The party that initiates and controls the transport — typically the party whose name appears on the transport document — bears consignor liability. Confirm with your fulfilment partner whose name appears on ADR transport documentation for your products, and what their compliance processes look like under the new directive.
Directive 2025/1801 aligns the inspection checklist and infringement categories with the ADR 2025 standard, which itself introduced significant changes for lithium batteries — including stricter test documentation requirements (UN 38.3 test summaries must be available on request), new packaging instructions for waste and damaged batteries, and additional UN numbers for sodium-ion batteries. Given the volume of lithium batteries shipped in e-commerce — standalone cells, power banks, products with embedded batteries — this is a classification area where documentation errors are both common and increasingly costly. The harmonised checklist checks battery documentation as a discrete inspection point.
Member States were required to transpose Directive 2025/1801 into national law by 23 June 2026. Several have already done so, with enforcement applying from 24 June 2026. Two examples illustrate the pattern of transposition:
| Country | Transposition instrument | Entry into operation | Notable provisions |
|---|---|---|---|
| Italy | MIT Decree of 13 April 2026 (G.U. No. 125, 1 June 2026) | In force 2 June 2026; fully operational 24 June 2026 | Transposes both Directive 2022/1999 and Directive 2025/1801; applies to all vehicles including non-EU countries transiting Italy; military vehicles exempt. Analysed by Studio Zunarelli. |
| Ireland | S.I. No. 249/2026 (signed 11 June 2026) | 23 June 2026 | Amends the 2011 Principal Regulations for the 12th time; adds 10 new classified offences (Nos. 57–66) covering prohibited containment, missing vehicle identification, structural serviceability, and placarding compliance. |
The pattern is consistent across Member States: each is transposing the new annexes to align national enforcement procedures with the harmonised checklist and three-tier classification system. Operators transporting dangerous goods internationally should check whether the specific countries on their routes have completed transposition and whether any national supplementary provisions apply.
Identify which of your products fall within ADR dangerous goods classification — batteries, aerosols, flammables, corrosives, and certain cosmetics are common examples. Confirm UN numbers, packing groups, and ADR class for each.
Check that your transport documents include the correct proper shipping name, UN number, packing group, total quantity, and consignor/consignee details for every dangerous goods line item. Incomplete documents are a Category I infringement.
Ask your carriers and fulfilment partners to confirm that their driver ADR certificates are valid and that their internal checklists have been updated to reflect the harmonised inspection format. A carrier's non-compliance creates disruption for your shipments.
Ensure all dangerous goods are in UN-approved packaging that is within its certified use-by date, undamaged, and correctly labelled with hazard labels, UN number, and proper shipping name. Damaged or expired packaging is a Category II infringement.
If you use a multi-carrier shipping platform, configure automation rules that require completion of dangerous goods fields before a label can be generated. This prevents incomplete documentation from reaching the carrier.
The directive applies to road transport of dangerous goods throughout the EU, and the harmonised inspection checklist will be in use at every roadside check point across all Member States from 24 June 2026.
Your most immediate obligations are: ensure all transport documents are accurate and complete before handover to your carrier; confirm packaging is UN-approved, undamaged, and within its certified period; and verify your goods classifications are correct under ADR 2025 (not an earlier edition). If you have a Dangerous Goods Safety Adviser, brief them on the new Category I/II/III framework so that internal audits use the same criteria as roadside inspectors.
Confirm in writing that your 3PL has updated its compliance procedures for the new directive. Specifically, ask whether their documentation sets include the full checklist fields required under Annex I of Directive 2025/1801, and whether drivers handling ADR shipments hold valid, current certificates. Liability for documentation errors may fall on you as the party whose name appears on the transport document.
ShippyPro connects your e-commerce store to 190+ carriers via a single shipping platform, and its AI Shipping Automation engine uses a trigger/condition/action workflow model that lets you configure rules based on shipment attributes — including product type, weight, destination, and order tags. While ShippyPro does not generate ADR documentation itself, it can act as a process control layer: configured automation rules can add notes, assign specific carriers, or trigger review queues for orders matching criteria you define — helping ensure dangerous goods shipments are handled through the right workflow before they reach the carrier. The Track & Trace feature provides visibility across all shipments, so any carrier-reported status changes — including delays or holds during transit — surface in one place rather than requiring manual carrier-by-carrier checks.
For a full grounding in dangerous goods classification, UN numbers, IATA requirements, and packaging rules, see ShippyPro's Complete Guide to Dangerous Goods Shipping (2026 Edition) — a companion resource to this article.
Manage orders, labels, and 190+ carriers in one place. Build pre-shipment rules that flag dangerous goods orders before they reach the carrier.
Explore the Platform →Configure trigger/condition/action workflows to route dangerous goods orders through the right process — assign carriers, add review flags, or apply order tags before label generation.
See Automation →Real-time visibility across all carriers. Identify shipments delayed at inspection checkpoints before they become customer complaints.
Explore Track & Trace →The full reference for UN numbers, ADR classification, IATA rules, and packaging requirements for hazmat e-commerce.
Read the Guide →The full text of the delegated directive, including Annexes I and II with the harmonised checklist and three-tier infringement classification.
Read on EUR-Lex →Guides, tools, and carrier documentation to help e-commerce operations teams stay compliant and ship smarter.
Visit Resources →Commission Delegated Directive (EU) 2025/1801 was adopted on 23 June 2025 and published in the Official Journal of the EU on 13 October 2025. It updates Annexes I and II to Directive (EU) 2022/1999, which governs how EU enforcement authorities check compliance with the ADR (the European Agreement for the International Carriage of Dangerous Goods by Road). Member States were required to transpose it by 23 June 2026, and the rules apply in practice from 24 June 2026. It introduces a harmonised inspection checklist and a three-tier infringement classification system.
Common e-commerce products that may fall under ADR include: lithium batteries and devices containing them (Class 9), aerosol sprays such as deodorant, hairspray, and insect repellent (Class 2), alcohol-based products above certain concentrations including perfume and hand sanitiser (Class 3), paints and varnishes (Class 3), certain adhesives and resins, and cleaning products with corrosive properties (Class 8). Classification depends on quantity, concentration, and packaging type — not simply on the category of product. Businesses should verify individual product classifications with a Dangerous Goods Safety Adviser.
Yes, with conditions. The ADR permits digital documentation for dangerous goods transport, but only where the documents can be presented immediately and in a verifiable form during a roadside inspection. Under the harmonised checklist introduced by Directive 2025/1801, document availability is a scored inspection point — if the documents cannot be produced on demand at the roadside in a verifiable format, they may be treated as absent. Physical copies or offline-accessible digital versions that can be displayed and verified on demand are the safest approach.
It depends on the nature of the infringement. If the Category I breach relates to documentation errors or incorrect classification — both of which are the consignor's responsibility to prepare accurately — yes, liability can extend to you. Directive 2025/1801 explicitly assigns responsibilities to each party in the supply chain, including the consignor. A missing or incorrect transport document does not become the carrier's fault simply because it was the carrier's vehicle that was stopped.
No. Directive 2025/1801 and the ADR framework it amends apply exclusively to road transport. Air transport of dangerous goods is governed by IATA's Dangerous Goods Regulations (IATA DGR), currently in its 67th edition. Sea transport is governed by the IMDG Code. Operators who ship dangerous goods by multiple modes need to ensure compliance with each applicable framework separately.
ShippyPro connects 190+ carriers in one platform. With configurable automation workflows, you can route dangerous goods orders through a defined review process before the label is generated — adding process control to your most compliance-sensitive shipments.